Reissuing Leckey Products; Product Servicing; Technical Information - Leckey Squiggles Early Handbuch

14 Re-issuing Leckey
Products
Most Leckey products are assessed and
ordered to meet the needs of an individual
user. Before reissuing a product we
recommend that the therapist prescribing
the product has carried out an equipment
compatibility check for the new user and
has ensured that the product being re-issued
contains no modifications or special
attachments.
A detailed technical inspection should be
carried on the product prior to re-issuing.
This should be carried out by a technically
competent person who has been trained in
the use and inspection of the product. Please
refer to section 13 for the required checks to
be carried out.
Ensure the product has been cleaned
thoroughly in accordance with section 11 of
this manual.
Ensure a copy of the user manual is supplied
with the product. A copy can be downloaded
from our website www.leckey.com
Leckey recommend that a written record is
maintained of all product inspections carried
out during the reissue of the product.
If in any doubt to the continued safe
use of your Leckey product or if any
parts should fail, please cease using
the product and contact our customer
care team or your local dealer as soon
as possible.

15 Product Servicing

Servicing of all Leckey products should only
be carried out by technically competent
persons who have been trained in the use of
the product.
In the UK & ROI please contact the Leckey
Service Centre on UK 0800 318265 or ROI
1800 626020 and our customer service
department will be delighted to assist you with
your servicing requirements.
All international service enquiries should be
directed to the appropriate Leckey distributor
who will be delighted to assist you. For further
information on Leckey distributors please visit
our website www.leckey.com

16 Technical Information

User
Age Max 48 months
Weight Max User Weight 18kg / 39.6lbs
Stature Max 1000mm / 39.4 inches
System dimensions
Floor Mat
Width 760mm / 26.3 inches
Length 950mm / 37.4 inches
Sitting Support
Height 190mm / 7.4 inches
Depth 300mm / 11.8 inches
Seat width
Min 200mm / 7.9 inches
Max 250mm / 9.8 inches
Support Roll small
Width 60mm / 2.4 inches
Length 600mm / 23.6 inches
Support Roll medium
Diameter 80mm / 3.2 inches
Length 700mm / 27.5 inches
Trunk Wedge
Width 270mm / 10.6 inches
Length 208mm / 8.2 inches
Angle 7.5 degrees
Positioning Straps
Width 80mm / 3.14 inches
Length 660mm / 25.9 inches