SAFETY AND SET-UP _________________________
Avoid contacting hot surfaces
▪
and hold the pot only by handle.
Ensure that the appliance is
▪
switched off before moving it.
The base (black glass surface)
▪
on which the coffee-making pot
is placed gets hot during op-
eration. Therefore, do not touch
this area while using and until
the appliance gets cold.
This appliance should be con-
▪
nected to a maximum 30 mA
domestic fault current protec-
tion fuse for additional protec-
tion.
Use the appliance with a
▪
grounded plug.
If the supply cable is damaged,
▪
immediately stop using it to
prevent any danger and have it
replaced by the manufacturer,
service agent or similarly quali-
fied personnel.
Do not use the appliance if the
▪
appliance itself or any part of
it is damaged. Contact the au-
thorised service.
Do not use the appliance with
▪
an extension cord.
Do not immerse the appliance,
▪
power cord, or power plug in
water or any other liquids.
Do not touch the appliance or its
▪
plug with damp or wet hands.
Position the appliance in such a
▪
way that the plug is always ac-
cessible.
Prevent damage to the power
▪
cable by not squeezing, bend-
ing, or rubbing it on sharp
edges. Keep the power cable
away from hot surfaces and
naked flame.
Make sure that there is no dan-
▪
ger that the power cable could
be accidentally pulled or that
someone could trip over it when
the appliance is in use.
Unplug the appliance before
▪
cleaning it and never clean it
when it is in use.
Do not pull the power cable of
▪
the appliance to unplug the ap-
pliance from the outlet and do
not wrap its power cable around
the appliance.
Your mains power supply should
▪
comply with the information
supplied on the rating plate of
the appliance.
ENGLISH
23