Chapter 7 Internet Radio; Connecting To A Network - Block WFR 700 Bedienungsanleitung

› Press the „MODE"button repeatedlly or select „Internet radio"in the main menu for radio ope-
ration.
› The unit has access to thousands of stations and podcasts from around the whole world. If
you select the internet radio mode, then the unit will contact the Frontier Silicon Internet ra-
dio portal to access a list of stations that are organized into diferent categories, such as Country
or Genre. Once a station has been selected, the device will establish a connection to this station
and begin broadcasting. This internet portal also allows you to create several lists of your favorite
stations. In order to be able to use this extra feature, you will have to register your unit on the
internet portal website.

Connecting to a network

› You can use the options MENU › System settings › Network › Network Wizard to view a list of ac
cessible networks. Use the „ S
network. Once the „ENTER " button or the „C ONTROL" dial has been pressed, the device will try to
establish a connection to the selected network.
› [Network name] › Selects this network.s.
› [Rescan] › Repeats a search for available networks.
› [Wired] › Selects the network connected via cable.
› [Manual confg] › Starts the option for manual entry of network information:
1. Select the preferred connection type:
› Wired (via cable) or Wireless (via wireless network)
2. Select if the Direct Host Confguration Protocol (DHCP) is to be used:
DHCP enable › Activates use and switches to the automatic reception of network data.
DHCP disable › Deactivates use and carries on with the manual entry of network data.
3. IP settings
Set the IP address and the Subnet mask with „ " and „ " or with the „CONTROL" dial. Use the
" and „t
„ u
Downloaded from www.Manualslib.com
" and „ T
" buttons to switch between felds. Press „ENTER" to switch to the next feld.
Chapter 7
manuals search engine
" buttons or turn the „C ONTROL" dial to select the desired
▲
Internet radio 46
7
-
-