Herunterladen Inhalt Inhalt Diese Seite drucken

Hitachi RAC-18YH4 Bedienungsanleitung Seite 13

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 22
2
Set the
(TIME) button.
AM
PM
2
Set the turn-off time with
the TIMER control button.
2
Set the turn-on time with
the TIMER control button.
4
Set the turn-on time with
the TIMER control button.
• The timer may be used in three ways: off-timer, on-timer and ON/OFF (OFF/ON)-timer. Set the
current time at first because it serves as a reference.
• As the time settings are stored in memory in the remote controller, you only have to press the
(RESERVE) button is order to use the same settings next time.
Downloaded from
www.Manualslib.com
3
Set the current time with
the TIMER control button.
PM
Example: The current time is 1:30p.m.
3
Point the signal window of the remote controller toward the indoor unit,
and press the
The
sign lights. A beep occurs and the
PM
3
Point the signal window of the remote controller toward the indoor unit,
and press the
The
sign lights. A beep occurs and the
AM
5
Point the signal window of the remote controller toward the indoor unit,
and press the
The
(ON) mark starts lighting instead of flashing and the
sign lights. A beep occurs and the
PM
AM
manuals search engine
4
Press the
button again. The time
indication star ts lighting
instead of flashing.
PM
(RESERVE) button.
(OFF) mark starts lighting instead of flashing and the
Example: The device will turn off at 11:00p.m.
PM
The setting of turn-off time is now complete.
(RESERVE) button.
(ON) mark starts lighting instead of flashing and the
Example:
The device will turn on early so that the preset
temperature be almost reached at 7:00 a.m.
AM
The setting of the turn-on time is now complete.
(RESERVE) button.
(TIMER) lamp lights on the indoor unit.
PM
Example:
For heating, the device will turn off at 10:30 p.m.,
and then turn on early so that the preset
temperature be almost reached at 7:00 a.m.;
for cooling and dehumidifying, it will simply
AM
turned on at 7:00 a.m. The settings of the turn
on/off times are now complete.
– 13 –
(TIME)
• The time indication will
disappear automatically in 10
seconds.
• To check the current time
setting, press the
button twice.
The setting of the current
time is now complete.
(RESERVED)
(TIMER) lamp lights on the indoor unit.
(RESERVED)
(TIMER) lamp lights on the indoor unit.
(RESERVED)
(TIME)

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis