Werbung
Verfügbare Sprachen
Verfügbare Sprachen
i n d i c a t o r h a n d a d j u s t m e n t
If an indicator hand becomes misaligned, it is easily corrected:
1) Pull the crown to its outer position. The lower hand moves to the end
of its sweeps adjusting itself automatically.
2) The center hand should point to 12 o'clock. If it does not, press A to
move the hand clockwise until it points to 12 o'clock.
3) If the chronograph is reset and the linear hand is not pointing to 0,
then, press and hold B for 5 seconds to perform a full calibration of
the linear indicator. (Will take up to 32 seconds)
4) Push the crown in when done.
s e c o n d t i m e z o n e
The lower hand normally shows the time for the second time zone. Note
that the scale is 24 hours, with midnight at either end and noon in the
middle.
To set the second time zone time:
1) Pull the crown to its middle position. The lower hand shows the
second time zone time and the center hand shows the minutes.
4
0
2 2
30
20
10
0
2) Press B to move the center hand forward in 0.2 minute increments,
setting the minutes. Hold the button to move the hand quickly. The
lower and center hands move together; as the center hand makes one
revolution, the lower hand moves one hour. Assuming that the second
time zone time has the same minutes value as your time, the center
and minute hands should be aligned.
3) Press A to move the lower hand forward in one-hour increments. Hold
the button to move the hand quickly.
Center hand should be
aligned with minute hand
Move lower hand
A
forward one hour
CROWN
Move center hand
B
forward to set minutes
2nd time zone =
9:00 (9:00 AM)
5
Werbung
