Maintenance Schedule - Bosch GSK 64 Originalbetriebsanleitung

OBJ_BUCH-1039-002.book Page 26 Thursday, January 14, 2010 6:17 PM
26 | English

Maintenance Schedule

Always keep air outlet 4, discharge lock-off 2 and trigger
5 clean and free of foreign material (dust, chips, sand,
etc).
Measure
Draining the exhaust filter daily.
Keeping the lubricator filled at all
times.
Cleaning the magazine 11 and maga-
zine slider 12.
Ensuring that the discharge lock-off 2
functions properly.
Lubricating the pneumatic tool.
Draining the compressor.
1 609 929 U14 | (14.1.10)
Downloaded from www.Manualslib.com
Explanation
Prevents the accumulation of dirt/
debris and moisture in the pneumatic
tool.
Ensures the lubrication of the pneu-
matic tool.
Prevents the jamming of nails.
Promotes your work safety and effi-
cient usage of the pneumatic tool.
Reduces the wear of the pneumatic
tool.
Prevents the accumulation of dirt/
debris and moisture in the pneumatic
tool.
manuals search engine
Clean the magazine 11. Remove any plastic or wood chips
that may accumulate in the magazine during operation.
Clean the pneumatic tool in regular intervals using com-
pressed air.
Action
– Open the drain valve.
– Fill lubricator with the recommend-
ed lubricants.
(See "Lubricating the Pneumatic
Tool", page 25)
– Blow out the mechanism of the
magazine/magazine slider daily with
compressed air.
– Blow out the mechanism of the
discharge lock-off daily with com-
pressed air.
– Apply 2 3 drops of lubricant into air
–
connector 8.
(See "Lubricating the Pneumatic
Tool", page 25)
– Open the drain valve of the com-
pressor tank.
Bosch Power Tools