Herunterladen Inhalt Inhalt Diese Seite drucken

Philips Saeco Minuto HD8763 Schnellinstallationsanleitung Seite 22

Vorschau ausblenden Andere Handbücher für Minuto HD8763:
Inhaltsverzeichnis

Werbung

Instructions
22
Istruzioni
The descaling solution will be dispensed at intervals (dura-
tion: approx. 25 min).
La soluzione decalcifi cante sarà erogata ad intervalli (du-
rata: circa 25 min).
Empty the container.
Remove and empty the ca-
rafe.
Vuotare il contenitore.
Rimuovere e vuotare la ca-
raff a.
When this icon is displayed,
the water tank is empty.
Quando viene visualizzato
questo simbolo, il serbatoio
dell'acqua è vuoto.
Downloaded from
www.Manualslib.com
2
3
1 - Raise the dispensing spout;
2 - Press the side buttons;
3 - Empty the drip tray and place it back.
1 - Alzare l' e rogatore caff è;
2 - Premere i tasti laterali;
3 - Vuotare la vasca raccogligocce e reinserirla in posizione.
12
16
Repeat steps 12 to 16. Then
go to step 18.
Ripetere le operazioni dal
punto 12 al punto 16, quin-
di passare al punto 18.
manuals search engine
www.philips.com/support
When this icon is displayed,
Rinse the water tank and fi ll it with fresh water up to the
the water tank is empty.
MAX level. Place it back into the machine.
Quando viene visualizzato
Risciacquare il serbatoio e riempirlo con acqua fresca fi no
questo simbolo, il serbatoio
al livello MAX. Reinserirlo nella macchina.
dell'acqua è vuoto.
1
2
Install the milk carafe into the machine. Pull out the milk ca-
rafe dispenser to the right up to the
Place the container under the dispensing spout.
Press the
Installare la caraff a del latte nella macchina. Estrarre l' e ro-
gatore della caraff a verso destra fi no al simbolo
Riposizionare il contenitore sotto l' e rogatore caff è.
Premere il tasto
Note: The circuit needs to be cleaned with a preset
amount of water. If you had not fi lled up the water
tank to MAX level, the machine might require three or
MAX
more tanks for rinsing.'
Nota: Il circuito deve essere pulito con una quantità
di acqua preimpostata. Se il serbatoio dell'acqua non
viene riempito fi no al livello MAX, la macchina, per il
risciacquo, può richiedere il riempimento del serba-
Rinse the water tank and fi ll
toio per tre o più volte.
it with fresh water up to the
MAX level.
Risciacquare il serbatoio e
riempirlo con acqua fresca
fi no al livello MAX.
MAX
icon.
button to start the rinse cycle.
per avviare il ciclo di risciacquo.
.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis