Dynamic range control
Dynamic Range Control (DRC) is used to make quieter sounds in a digital radio broadcast easier to
hear at low volume or in a noisy environment. Check with the broadcasters to find out if they use DRC.
To change the DRC settings:
1.\ Press the Menu button.
2.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose 'DRC'.
3.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose
between one of the following options:
\ DRC high: Applies maximum compression to the DRC level. \
DRC low: Applies reduced compression to the DRC level.
\
DRC off: Removes DRC compression.
Changing the digital radio station order
To change the order that Evoke displays digital radio stations in:
1.\ Press the Menu button.
2.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose
'Station Order'.
3.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose
between one of the following options:
\Alphanumeric: Choose this option to display digital radio stations in alphanumerical order.
\ Ensemble: Choose this option to list stations in groups according to their multiplex. Multiplexes or
ensembles are groups of stations owned and broadcast by a single operator.
\
Valid: Choose this option to only display active radio stations.
EN
25