Choosing An Equalisation Setting - PURE Evoke C-F6 Bedienungsanleitung

Keep network connected
To set Evoke up so that you can use the Pure Select app to take Evoke out of
standby: 1.\ Press the Menu button.
2.\ Turn and press the Select dial or use the <Select> buttons on the remote control to select
'Main menu' > 'System settings' > 'Network' > 'Keep network connected'.
3.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose 'Yes' to
enable Evoke to be taken out of standby using the app. If you want to disable this feature to reduce
power consumption, turn and press the Select dial or use the <Select> buttons on the remote
control to choose 'No'.
Note: Evoke will consume more power if you decide to maintain the network connection during standby.

Choosing an equalisation setting

Evoke includes seven equalisation audio presets and also includes a loudness setting to help improve
your listening experience when listening to Evoke at a low volume.
1.\ Press the Menu button.
2.\ Turn and press the Select dial or use the <Select> buttons on the remote control to select
'Mani menu' > 'System settings' > 'Equalizer'.
3.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose
between 'Flat', 'Jazz', 'Rock', 'Movie', 'Classic', 'Pop' and 'News'. If you want to use a custom
equalisation setting, select 'My EQ' (see below for more information).
Creating a custom equalisation setting
You can manually set the bass and treble levels and specify if the loudness setting is enabled to
help improve your listening experience when listening to Evoke at a low volume.
Setting the bass and treble manually
1.\ Press the Menu button.
2.\ Turn and press the Select dial or use the <Select> buttons on the remote control to select
'Main menu'> 'System settings' > 'Equalizer' > 'My EQ profile setup'.
3.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose
'Bass' or 'Treble'.
4.\ Turn and press the Select dial or use the <Select> buttons on the remote control to set the level
from '-14' (low) to '14' (high).
Switching on Evoke's loudness setting
If listening to Evoke at low volume, you can use the loudness setting to improve your listening
experience. To switch the loudness setting on or off:
1.\ Press the Menu button.
2.\ Turn and press the Select dial or use the <Select> buttons on the remote control to select
'Main menu' > 'System settings' > 'Equalizer' > 'My EQ profile setup'.
3.\ Turn and the Select dial or use the <Select> buttons on the remote control to scroll down to
'Loudness'. 4.\ Press the Select dial to toggle the loudness setting 'On' or 'Off'.
Choosing a custom equalisation setting
When you have finished setting up your profile, carry out the following to listen to it on
Evoke. 1.\ Press the Menu button.
2.\ Turn and press the Select dial or use the <Select> buttons on the remote control to select
'Main menu' > 'System settings' > 'Equalizer'.
3.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose 'My EQ'.
EN
21