Backlight; Dab Settings; Manual Tuning; Prune Invalid - PURE Evoke C-F6 Bedienungsanleitung

Backlight

You can adjust the duration that the screen is illuminated for and the brightness of the screen when
Evoke is switched on or in standby.
Power-on level
To specify the brightness of the screen when Evoke is switched on or in
standby: 1.\ Press the Menu button.
2.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose
'Main menu' > 'System settings' > 'Backlight'.
3.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose to
adjust the screen's brightness in 'Operation Mode' or 'Standby mode'.
4.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose
between 'High', 'Medium' or 'Low' for when Evoke is switched on or choose between 'Medium',
'Low' and 'Off' for when Evoke is in standby.

DAB settings

Note: You can only see the DAB settings when you have selected 'DAB' as the radio source.
Scan
You can use the scan (autotune) function to automatically scan for new digital radio stations and
remove inactive ones.
To carry out an autotune:
1.\ Press the Menu button.
2.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose
'Scan'.The number of stations found will be displayed during the autotune.
When the autotune has finished, Evoke will tune to the last station that you were listening to. If the last station
you were listening to is no longer available, Evoke will tune into the first station in the alphabetical list.

Manual tuning

To manually tune Evoke to a digital radio station that broadcasts on DAB Band
III: 1.\ Press the Menu button.
2.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose 'Manual
tune'.
3.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose the
channel that the radio station is broadcasting on.
4.\ Press the Menu button to return to the main menu.

Prune invalid

To remove inactive stations from the station
list: 1.\ Press the Menu button.
2.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose
'Prune invalid'.
3.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose
'Yes'. Evoke will remove all inactive stations from the station list.
24