Netremote Pin Setup; Network Profile - PURE Evoke C-F6 Bedienungsanleitung

Manually connecting Evoke to your wireless network
Manually configure your wireless network (for advanced users
only). 1.\ Press the Menu button.
2.\ Turn and press the Select dial or use the <Select> buttons on the remote control to select
'Main menu' > 'System settings' > 'Network' > 'Manual settings'.
3.\ Follow the steps shown on Evoke's screen to manually add Evoke to your wireless network.

NetRemote PIN Setup

If you want to restrict the devices that can connect to Evoke using the Pure Select app, you can get
Evoke to request a PIN number when you first connect to Evoke.
To set up a pin number: 1.\
Press the Menu button.
2.\ Turn and press the Select dial or use the <Select> buttons on the remote control to select
'Main menu' >'System settings' > 'Network' > 'NetRemote PIN Setup'.
3.\ Enter your network key or password by turning and pressing the Select dial or use the
<Select> buttons on the remote control to highlight and select the numbers. If you want to
delete the last number, turn the Select dial to select 'BKSP' and push to confirm.
4.\ Turn and press the Select dial or use the <Select> buttons on the remote control to select 'OK'.
You will now need to enter this PIN whenever you want to connect a new device to Evoke using
the Pure Select app.

Network profile

Every time you connect Evoke to a new Wi-Fi, Evoke will store the connection information as a profile so
that if you plan to use Evoke in several locations, you won't have to keep re-enter the Wi-Fi settings.
Evoke stores the four most recent Wi-Fi profiles and will try to connect to a Wi-Fi network using the
stored profiles. If Evoke can't connect to the Wi-Fi using one of the stored profiles, you will need to
connect Evoke to your network using the wizard (see page 19) or manually (see above).
If you think you will only visit a Wi-Fi connection once, you can delete the profile by carrying out
the following:
1.\ Press the Menu button.
2.\ Turn and press the Select dial or use the <Select> buttons on the remote control to select
'Main menu' > 'System settings' > 'Network' > 'Network profile'.
3.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose the
profile that you want to delete.
4.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose 'Yes'
to delete the profile. If you want to keep the profile, turn and press the Select dial or use the
<Select> buttons on the remote control to choose 'No'.
Note: You cannot delete a profile that is currently in use.
Clear network settings
Evoke will delete all previous Wi-Fi connections, passwords and other network settings. If using
the wireless connection method, this will also perform a fresh scan for available networks.
1.\ Press the Menu button.
2.\ Turn and press the Select dial or use the <Select> buttons on the remote control to select
'Main menu' > 'System settings' > 'Network' > 'Clear network settings'.
3.\ Turn and press the Select dial or use the <Select> buttons on the remote control to choose 'Yes'
to clear all network settings. If you want to keep the current network settings, turn and press the
Select dial or use the <Select> buttons on the remote control to choose 'No'.
20