Connecting A Device With An Auxiliary Cable; Alarms; Setting An Alarm - PURE Evoke H3 Benutzerhandbuch

Tip: If you want to connect a different Bluetooth device to your Evoke H3, switch off Bluetooth on the
connected device first.

Connecting a device with an auxiliary cable

You can use an auxiliary cable to connect a device, such as an MP3 player, to your Evoke H3. You can
then enjoy music saved on the device through your Evoke H3.
To connect a device with an auxiliary cable:
1. Press until 'Auxiliary Input' is displayed.
Insert an auxiliary cable into the Aux in socket on the back of your Evoke H3.
2.
3. Insert the other end of the auxiliary cable into the device you want to connect.
Your Evoke H3 is now ready to play music from the connected device.

Alarms

To wake up to your favourite radio station, you can set up to two alarms on your Evoke H3.
Note: You cannot set alarms when your Evoke H3 is being powered by a ChargePAK.

Setting an alarm

To set an alarm:
1. Press .
2. Press the Select buttons to choose 'Alarm 1' or 'Alarm 2'.
3. Press the Select buttons to change settings for the alarm.
12
Bluetooth
14-7-2016
Thursday
Connected