Mounting; Adhesive Strip Mounting - HomeMatic IP HMIP-WRC2 Montage- Und Bedienungsanleitung

Start-up
• If the LED lights up red, please try again.
• Select the desired solution for your device.
• In the app, give the device a name (there is no
allocation to a room required for the wall-mount
remote control).
5.2

Mounting

Please read this entire section before starting to
mount the device.
You can use the supplied clip-on frame (A) to mount the
wall-mount remote control or easily integrate it into an
existing brand switch system (see „5.2.3 Installation in
multiple combinations" on page 36).
If you want to mount the wall-mount remote control
with the supplied clip-on frame, you can use
• the supplied double-sided adhesive strips or
• the supplied screws
to fix it to a wall.
5.2.1

Adhesive strip mounting

For mounting the assembled device with adhesive strips,
please proceed as follows:
• Choose a site for installation.
34