General System Information; Start-Up; Teaching-In - HomeMatic IP HMIP-WRC2 Montage- Und Bedienungsanleitung

General system information

4 General system information
This device is part of the Homematic IP smart home sys-
tem and works with the Homematic IP radio protocol. All
devices of the system can be configured comfortably and
individually with the Homematic IP smartphone app. Al-
ternatively, you can operate the Homematic IP devices via
the Homematic Central Control Unit CCU2 or in connec-
tion with various partner solutions. The available functions
provided by the system in combination with other com-
ponents are described in the Homematic IP User Guide. All
current technical documents and updates are provided at
www.eQ-3.de.
5

Start-up

5.1

Teaching-in

Please read this entire section before starting
the teach-in procedure.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
To integrate the wall-mount remote control into your
system and enable it to communicate with other Home-
matic IP devices, you must teach-in the device to your
32