Grundig DKR 1000 Bedienungsanleitung Seite 29

DEVICE­MAINS­POWER­CONNECTION­AND­
SETTINGS
Note:­
You can select whether the device will scan
radio stations with Strong Station Only or All
Stations from the menu of FM mode. To do
this;
1 Long press the »INFO/MENU« button to
open the menu.
Display: < Scan setting >.
7
2 Choose the option < Scan setting > by short
press the »OK« to confirm.
Display: < Strong station only > or < All
7
stations >.
3
Select the desired option (e.g. Strong station
only) by short press the
+
« button, or rotates the »OK« knob, short
press the »OK« to confirm.
4
Long press »INFO/MENU« button to close
the menu.
5
Now, long press the »OK« button to start the
Auto Tuning System (AMS) again for scan the
FM waveband and store the first 30 radio
stations with a strong signal as presets 1 to
30 (if available).
or
6 Long press the »TUNE
button to search the available previous/next
radio stations.
The automatic station search starts, and stops
7
at the next station with a strong signal.
or
7
Press briefly the »TUNE
button until you have found the frequency you
want.
The frequency changes in steps of
7
0.05MHz.
Tuning and storing DAB and
FM radio stations – after a
removal
After the automatic station search, all radio sta-
tions will be stored in the program list. That is
reasonable, if you will use the device in ano-
ther place or search new DAB radio stations.
1
Long press the»
-
»TUNE « or »TUNE
- +
« or »TUNE
- +
« or »TUNE
/­MODE« button, for 3
seconds, to switch the device on.
2
Short press the »
select the
3 DAB/FM
In
ton to start the Auto Tuning System directly.
the automatic station scan starts for searches
7
and stores the radio stations.
4 After the scanning process completed, the
device set the first received station of
FM for listen
Updating the time – automati-
cally
The device will update the time automatically,
when a time signal is received for a radio
station.
«
«
/­MODE« button to
DAB/FM mode.
mode, long press the »OK« but-
ENGLISH
DAB/
29­