Installation - Ventus W266 Gebrauchsanweisung

All-In-One Wireless Professional Weather Station (DCF) (W205-U)
Functions
Weather forecast with sunny, partly cloudy, cloudy, rainy and stormy
Barometric pressure display
Wind direction display
Average & gust wind speed with storage of the minimum and maximum
Daily, weekly, monthly and total rainfall display
Lightning detection with estimated number of lightning strike and distance display
Lightning alert indication (Approaching, Departing & Overhead) and alarm setting
Daily maximum and current UV Index with estimated exposure time display
Room temperature and interior humidity display with storage of the minimum and maximum
values
Outside temperature and outside humidity display with storage of the minimum and maximum
Dew point, heat index & wind chill display
Ice/frost alert
Radio-controlled DCF-77 time signal reception with time display, time-zone setting
Date display
Alarm clock with snooze function
In this package you will find:
One monitor (main unit)
One Transmitter (Transmits Wind, Rain, UV, Lightning, Channel-1 Temperature/humidity data)
4 pieces of Nylon straps
One owner's' manual
Power adapter for the monitor
Additional tools needed for installation
- Small Phillips screwdriver
Mast, 1 – 1.25 inch (2.54 – 3.18 cm) in diameter (to mount the transmitter)
-

Installation

Choose a suitable location for your transmitter
- The transmitter must be set up outdoors
-
The transmitter must be located within the signal transmission range (100 meters line of sight). Walls and
obstructions
assembly.
- Ideally the transmitter should be mounted on a mast or roof of a house, and in an open area where wind, rain
& sunlight can access the transmitter from all sides to enable the wind force, wind direction, rainfall & UV
Downloaded from www.Manualslib.com
reduce the transmission range. Check the signal reception on the weather station before final
manuals search engine
User's Manual
measured values
measurement
measured values