Assembly - Zipper Maschinen ZI-HS10TN Betriebsanleitung

14

ASSEMBLY

ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-HS10TN / ZI-HS12TN / ZI-HS14TN
A. Mounting the wheel axle and wheels: Slide the
wheel axle into the two holes on the frame and
attach the wheels to it. Secure the wheels with a
cotter pin and attach wheel caps.
B. Expanding the wedge ram: Remove the R-pins
(1). Keeping the support stand against the wedge,
lower both control handles to expand wedge ram
(2). Insert the R-pins to secure the cylinder to the
splitter (3). Secure the R pins with the cotter pin
into the spring tabs (4).
For this process, it is necessary to have
the log splitter ready for operation.
Hydraulic oil filled, motor connected to
main supply.
C. Removing the support
handles to retract the wedge ram. Remove the
support stand.
ASSEMBLY
NOTICE
stand: Release both control
27