Assembly Zi-Hs5Tn & Zi-Hs7Tu; Lifting Handle; Log Tray - Zipper Maschinen ZI-HS5TN Betriebsanleitung

¡ERROR! UTILICE LA PESTAÑA INICIO PARA APLICAR ÜBERSCHRIFT 1 AL TEXTO QUE DESEA QUE APAREZCA
19 ASSEMBLY ZI-HS5TN & ZI-HS7TU
19.1
19.2
ZIPPER MASCHINEN GmbH
ZI-HS5TN; ZI-HS7TU

Lifting Handle

Log Tray

www.Zipper-Maschinen.at
A. Mounting the lifting handle: Attach
the lifting handle to the U-bracket with
two M6x16 screws.
B. Fastening the guard bottom plate:
Mount the guard bottom plate to the rear
guide plate and secure it with the two
socket head cap screws M6×12 and the
lock nuts.
Loosen the socket head cap screw and the
large washer on the wheel bracket, insert
the open end of the support strut 2
between the large washer and the wheel
bracket and tighten the screw.
Connect the upper end of support strut 2
to the guard bottom plate with a cross
recessed pan head screw M6×12 and lock
nut M6 and tighten.
AQUÍ.
32