Cleaning; Quick Connection Guide - Ambu Man Advanced Bedienungsanleitung

6.6. I.V. Trainer (optional)
The I.V. Trainer enables practicing placement of an infusion cannula and insertion of fluid
(Distilled Water).
Further detailed instructions can be found in the Directions for use for the Ambu I.V. Trainer.
NOTE: During transport the fluid inside the I.V. Trainer must be drained off.
Only use distilled water when filling the I.V. Trainer and when simulating infusion and
injection, otherwise the tubes simulating veins and arteries become sticky and the
material will decompose.
During storage between training sessions the I.V. Trainer must be covered or placed in the
carrying case together with the AmbuMan Advanced. The tubes simulating veins and
arteries and the skin are made of natural latex. The arm must therefore not be exposed to
sunlight or other U.V. (ultra-violet) rays as the material will become sticky and decompose.

7. Cleaning

7.1. Cleaning of skull, neck and body
The skull, face piece, neck and body can be wiped over with a cloth moistened in a mild
detergent and then wiped over once more using a cloth moistened in clean water.
When washing, never allow detergent or water to enter the skull, body or instrument unit.
If necessary, cover the connection between body and instrument unit with a cloth.
Marks on the manikin left by lipstick or ball pen can penetrate the material and should
therefore be removed as quickly as possible using alcohol.
7.2. Cleaning of clothing
The tracksuit is made of 50% cotton and 50% polyester and is washable at max. 40° C
(104° F).
7.3. Cleaning of suitcase
The suitcase can be cleaned using a mild detergent with a cloth or soft brush, rinsed in
clean water, and then dried off.
7.4 I. V. Trainer
To clean and maintain the I.V. Trainer, please see the direction for use for the Ambu I.V. Trainer.
11

8. Quick connection guide

To connect the manikin to a computer device the following step have to be performed:
1. Turn on the manikin.
2. Connect the WiFi of the Computer device with the network "AmbuW".
3. Open the web browser and type "Ambu.login".
Then follow the instructions on the screen.
If an NFC (near filed communication) device is used the connection can be set automatically
following the enclosed steps:
1. Turn on NFC on the computer device
2. Place the device on the manikin next to the Power button to connect to the network.
3. Place the device next to the opposite side of the instrument panel to start the
software application.
12