Preparing For Use - Philips SmartSleep Handbuch

12
English

Preparing for use

Charging
3
2
1
The Snoring Relief Band consists of a sensor and a
strap.
Wear the Snoring Relief Band when you sleep to
reduce snoring caused by sleeping on your back.
The sensor will gently vibrate to encourage you to
turn from your back to your side.
Charge the sensor before first time use and when
the battery low indicator blinks orange.
Charging takes up to 8 hours. A fully charged
sensor has an operating time of up to 8 sleep
sessions.
Charging with the adapter
Tip: Charge the sensor when it is in the pouch of
the strap.
1 Insert the small plug of the USB cable into the
socket on the back of the sensor.
2 Insert the large plug of the USB cable into the
socket of the adapter.
3 Insert the adapter into the wall socket.
Note: You cannot use the sensor while charging.
Note: Put the sensor on a flat surface while
charging.
Note: The USB socket on the sensor can only be
used for charging.