Troubleshooting - Philips SmartSleep Handbuch

Troubleshooting

Problem
The Snoring
Relief Band
doesn't work for
me.
3 Disconnect the battery wire connector from its
housing by pulling on the wires close to the
connector.
4 When you have removed the connector, gently
pull the battery from the housing (it is fixed with
double sided tape) and dispose of it properly
(see 'Recycling').
This chapter summarizes the most common
problems you could encounter with the product. If
you are unable to solve the problem with the
information below, visit www.philips.com/support
for a list of frequently asked questions or contact
the Consumer Care Center in your country.
Possible cause
You do not only
snore when you are
sleeping on your
back, but also when
you sleep on your
side and/or stomach.
The sensor is most
effective for people
who snore when
sleeping on their
back.
English
Solution
Use the Snoring Relief
Band for at least 4 weeks
to determine if it is
effective for you.
23