Faults And Fault Diagnosis; Maintenance And Inspection Calendar; Disposal - Taurus TF-TB2100 Montage- Und Bedienungsanleitung

4.2

Faults and Fault Diagnosis

The equipment undergoes regular quality controls during production. Nevertheless, faults or
malfunctions may occur. Frequently, individual parts are responsible for these disturbances, an
exchange is usually sufficient. Please refer to the following overview for the most common errors
and how to correct them. If the equipment still does not function properly, contact your contract
partner.
Fault
Squeaking or
cracking noises
4.3

Maintenance and Inspection Calendar

To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no
solvents!) after each training session.
The following routine tasks must be performed at the specified intervals:
Part
Screw connections
Spring
Punching bag element
Base
Legend: C = clean; I = inspect
5

DISPOSAL

At the end of its operational life, this equipment cannot be disposed of in normal household waste.
Instead, it must be disposed of via an electricals recycling centre. Further information can be
obtained from your local authority's recycling service.
The materials can be recycled as per their symbols. Through the reuse, recycling
of materials or other forms of recovery of old equipment, you make an important
contribution to the protection of the environment.
30
Cause
Screw connections too
tight or too loose
Weekly
C
C
Solution
Check the screw connections
Monthly Quarterly
I
I
I
Boxing Trainer
I