Technical Data - Scheppach TPX710 Original Bedienungsanleitung

27 Never try to work with an incomplete machine or
a machine with unapproved modifications.
28 It is advisable not to use the hedge trimmer
when other persons, and particularly children,
are nearby.
29 Children are not allowed to use the hedge trim-
mer.
30 The machine may exceed 85 db (A) at the work-
place. The operator will require noise protection
measures and ear muffs if this is the case.
31 Always ensure that all the handles and safety
equipment is fitted when the hedge trimmer is
in use.
32 Examine the hedge for any concealed objects,
e.g. wire, before you start your work.
33 This equipment is not designed to be used by
people (including children) with limited physical,
sensory or mental capacities or those with no
experience and/or knowledge unless they are su-
pervised by a person who is responsible for their
safety or they have received instructions from
such a person in how to use the equipment safely.
Children must always be supervised in order to
ensure that they do not play with the equipment.
Do not lose this safety information.
Residual risks
The machine has been built using modern technology
and in accordance with recognized safety rules.
Some hazards, however, may still remain.
• Risk of injury to fingers and hands from the tool in
operation during improper use.
• Electrical hazards when unsuitable electric con-
nections are used.
• Safety hazard from the hedge clippers in case of
long hair and loose clothing; Wear personal protec-
tive equipment such as a hair net and tight work
clothing.
• Although having regarded all considerable rules
there may still remain not obvious remaining haz-
rds.
• Minimize remaining hazards by following the in-
structions in "Safety Rules", "Use only as author-
ized" and in the entire operating manual.
26 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

6. Technical data

Hedge trimmer
Technical data
Cutting data hedge trimmer
Cutting circle
diameter mm
Bar length mm
Cutting length mm
Max. cutting
speed max. min
-1
Telescope length
min./ max. mm
Tilting range
Power unit
Engine V / Hz
Engine output W
Weight kg
Pole saw
Technical data
Data pole saw
Bar length mm
Cutting length
mm
Guide bar typ
chain pitch
Saw chain type
Chain link
thickness "
Max. cutting
speed max. min
-1
Telescope length
min./ max. mm
Power unit
Motor V / Hz
Engine output W
Weight kg
Subject to technical changes!
Information concerning noise emission measured ac-
cording to relevant standards:
Sound pressure L = 93 dB(A)
pA
Sound power L = 100 dB(A)
WA
Uncertainty K = 3 dB(A)
PA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Vibration left hand A = 4,885 m/s
hv
Vibration right hand A = 3,556 m/s
hv
Uncertainty K = 1.5 m/s
2
PA
18
450
410
1540
1900-2500
0° - 120°
230-240 / 50
500
3,4
240
190
AP08-36-507P
3/8"
3/8-36.0.05
1,3
3800
1580 - 2150
230-240 / 50
710
3,1
2
2