Important Information; Care; Fault Finding - AUDIOLINE AB 818 G Bedienungsanleitung

IMPORTANT INFORMATION

4. IMPORTANT INFORMATION
4.1

CARE

The case of your AUDIOLINE 818G can be cleaned with a damp cloth. Do not use
spray polish or cleaning cream with abrasive particles, which could damage the
loudspeaker or the case. Do not expose the unit to direct sunlight and avoid extreme
humidity.
4.2

FAULT FINDING

If a fault should occur, please first check whether this is caused by the unit or by the
telephone line. For this purpose, remove all extra telephone equipment and connect
only the AUDIOLINE 818G directly to the TELEKOM telephone socket. If the fault is
still there, connect just your telephone to the telephone socket. The results will show
you where the fault lies. Of course, you can always ring the DEUTSCHE TELEKOM
service department who will give you more advice on checking your installation. You
will find the telephone number in your telephone directory.
Message LED does not come on: Check whether the mains adapter is correctly
seated in the socket. Make sure that the mains socket is in good working order.
Battery flat – LED flashes: The battery is discharged and must be replaced. If the
power fails, your greeting, all recorded messages and the day and time
announcement will be deleted.
Undefined faulty behaviour: If your answering machine does not work correctly, you
can completely reset the AUDIOLINE 818G. In doing so, your greeting and all
recorded messages will be deleted. For this purpose, unplug the plug-in mains power
supply from the socket and remove the batteries. Refit the batteries after ca. 5
seconds and connect the AUDIOLINE 818G to the mains socket again.
All settings must now be re-entered from the beginning (see Chapter 1.).
32
AUDIOLINE 818G