Switching On Remotely; Remote Access With Insufficient Memory Capacity - AUDIOLINE AB 818 G Bedienungsanleitung

AUDIOLINE 818G
3.5

SWITCHING ON REMOTELY

Imagine that you have left your office or your house and have forgotten to switch on
your answering machine. With the AUDIOLINE 818G, you have the facility to switch
on the answering machine from another telephone.
Call your number and let it ring until your call is answered by your answering machine
(ca. 9 times).
After the signal tone, enter your personal authorisation code. A signal tone confirms
that the right code has been entered.
Press the keys 9 and #. And your answering machine will be switched on.
Now put the receiver down or make use of further remote access functions. In this
regard, see Item 3.3.
3.6

REMOTE ACCESS WITH INSUFFICIENT MEMORY CAPACITY

You can control your answering machine at any time using the remote access facility.
If, however, there is no memory left for new messages, the AUDIOLINE 818G will no
longer accept calls. In this case, please proceed as follows:
Call your number.
Let it ring 9 times and your answering machine will respond with three short
signal tones.
Now enter your authorisation code. You will hear two signal tones in
confirmation and you now have the possibility of recreating more memory
space by deleting messages. In this regard, first listen to the messages and
then delete individual messages or all messages. See also Item 3.3.
REMOTE ACCESS
31