Assembly - Texas A/S Vision 700 Bedienungsanleitung

Before using the machine for the first time, the user should be instructed in its use
by the dealer or another qualified person.
The machine operator is responsible for the safety of other people in the vicinity.
Never use the machine when there are other people, particularly children, or
animals nearby.
Minors must not be permitted to operate the machine.
The machine must only be loaned to persons who are familiar with its operation.
The user instructions must always be provided with the machine.
The tiller must only be operated by persons who are rested, healthy and fit. If the
work is tiring, regular breaks should be taken. Do not use the machine under the
influence of alcohol.
Always check before starting that nuts and bolts are correctly tightened.
Always check before starting the oil level on the engine.
Always check before starting the grease on the gear.

Assembly

1. Figure A shows the contents of the box:
1)
2) Handelbar
3)
4)
5)
6)
7)
8)
9)
10) Cotter bolt with cotter pins X 6
11) Cotter bolt with cotter pins X 2
12) Screws and nuts for mounting side guards x 10
13) User's manual
2. Figure B shows mounting of the upper handle bars. Use the supplied bolt and hand knob.
Please note that the bolt goes through the spring, Figure B, 2.
The front bolt must be loosened before mounting, see Figure B, 1.
3. Figure C.
Mount wheel on wheel bracket as shown on figure 1.
Downloaded from www.Manualslib.com
"Caution! Rotating blades"
Using the machine on steep slopes is dangerous!
Only use the machine in areas where it can be
operated safely!
Tiller with engine
Side guard
Wheel bracket
Support wheels
Outer blades
Extension rotors
Rear console
Debth skid
manuals search engine
16