Technical Data; Before Starting The Equipment; Cleaning And Ordering Spare Parts - EINHELL TC-TW 150 Originalbetriebsanleitung

case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Dimensions .............approx. 685 x 875 x 455 mm
Net weight: .................................... approx. 53 kg
Max. load capacity: ...................................150 kg
5. Assembly
Important! To avoid malfunctions, please note
that all the drawers must be COMPLETELY
closed before you pull one out!
•
The handle (6) supplied with the equipment is
already fitted but can also be mounted on the
other side of the trolley (Fig. 2).
•
For details of how to mount the wheels (3),
please refer to Figure 3 and turn the tool trol-
ley on its top.
•
If problems arise with the drawers, please
refer to the following instructions:
What to do if, a drawer cannot be closed pro-
perly:
•
Lock and unlock the lock until you hear a loud
"click".
•
Open a second drawer and then close both
drawers simultaneously or
•
Activate the emergency release (4). This
is done by moving the emergency release
on the underside of the tool trolley. This will
release the lock on the tool trolley (see Figs.
4 - 6).
none of the drawers can be opened, although
the lock is not locked:
•
Lock and unlock the lock until you hear a loud
"click".
•
Activate the emergency release (4) (see Figs.
4 - 6).
GB

6. Before starting the equipment

Unlock the drawers by pushing down the locking
switch (4) located in the bottom drawer. (Fig. 5-6).
•
The keys (2) for the tool trolley (1) are in
two different places. One is attached to the
packaging of the tool trolley, the other to the
instructions for the tool trolley.
•
Please keep the keys safe in different places,
but NEVER in the tool trolley.
•
After transportation and/or assembly make
sure that all drawer compartments are com-
pletely closed.
•
For safety reasons the tool trolley is equipped
with pull-out stops for the drawers. This pre-
vents several drawers being opened at the
same time.
7. Cleaning and ordering spare
parts
7.1 Cleaning
Clean the tool trolley with a slightly damp cloth
and if necessary a small amount of conventional
paint cleaner. To avoid damaging the surfaces do
not use solvents or other aggressive or scouring
cleaning products.
7.2 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
- 11 -