Radio Operations - Clarion AB243R Bedienungsanleitung

Basic Operations
Switching display
While pressing the BAND button 6, press the
DISP button % to select the desired display.
The display switches in the following order:
Main ➜ Clock (CT) ➜ Main ...
* If the display is changed by other button operation
when the clock (CT) is displayed, the clock display
returns automatically after the operation.
The example shows the display in radio mode.
*
Downloaded from www.Manualslib.com manuals search engine

Radio Operations

Listening to the radio
1) To tune in a station, first use the BAND but-
ton 6 to select FM (FM1, FM2, FM3, FM4)
or AM (MW/LW).
The band switches as follows each time the
BAND button 6 is pressed:
FM1 ➜ FM2 ➜ FM3 ➜ FM4 ➜ AM ➜ FM1
(The FM1, FM2, FM3 and FM4 bands are
provided so that a maximum of 20 FM sta-
tions can be preset, but the reception fre-
quency range is the same for all four.)
2) Press the up or down button 1. Tuning auto-
matically stops at a broadcasting frequency.
(Seek tuning)
Seek tuning
There are two types of seek tuning: DX seek, in
which receivable stations are tuned in order, and
Local seek, in which only stations with good
reception are tuned in.
DX seek
1) Press the BAND button 6 to select the band.
2) Press the up or down button 1. "DX"
appears in the display, and tuning automati-
cally stops at a broadcasting frequency.
Local seek
1) Press the BAND button 6 to select the band.
2) Press the up or down button 1 for 1second
or longer. "LO" appears in the display, and
tuning automatically stops at a broadcasting
frequency.
Manual tuning
1) Press the BAND button 6 to select the band.
2) Press the BAND button 6 for 2 seconds or
longer.
3) "MAN" appears in the display, and manual
tuning is possible.
4) Use the up or down buttons 1 to tune in sta-
tions.
The mode automatically switches back to the
*
seek tuning mode after 7 seconds.
7
AB243R/AB243RG