Setting And Starting A Washing Programme; Washing Programmes - Leonard LI1315 Benutzerinformation

2. Pull the basket out.

SETTING AND STARTING A WASHING PROGRAMME

Select and start a washing programme
1. Close the door.
2. Select a washing programme. Refer to

'Washing programmes'.

– The on/off indicator light comes on.
3. Press the start/cancel button. The
washing programme starts automati-
cally.
– The start/cancel indicator light
comes on.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues
from the point of interruption.
Cancelling the washing programme
If the washing programme has not started,
you can change the selection.
To change the selection while the washing
programme operates, it is necessary to
cancel the programme.
WASHING PROGRAMMES
Programme
1)
Type of soil
Normal soil Crockery and cutlery
Fresh soil Crockery and cutlery
3. Put the basket in the upper position.
4. Put back the front runner stops (A) in
their initial position.
Caution! If the basket is in the upper
position, do not put cups on the cup
racks.
• Press and hold the start/cancel button
until the start/cancel indicator goes off.
Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.
End of the washing programme
When the washing programme is comple-
ted, the end indicator comes on.
Deactivate the appliance and open the ap-
pliance door.
Remove the items from the baskets
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless steel
becomes cool more quickly than the
dishes.
Type of load
Prewash
Wash 65 °C
Rinses
Dry
Wash 65 °C
Rinse
leonard 25
Programme description