Cleaning The Appliance; Cleaning The Remote-Power-Control Handle; Opening The Lid; Closing The Lid - Bosch BGB6 Gebrauchsanleitung

Cleaning the appliance

Requirement: The appliance is
switched off.
→ "Switching off the appliance",
Page 34
Clean the appliance and the ac-
1.
cessory with a soft cloth and a
commercially available plastic
cleaner.
Clean the infrared receiver located
2.
on the On/Off switch.
Cleaning the Remote-Power-
Control handle
Tip: Clean the infrared transmitter on
the Remote-Power-Control handle
regularly. A dirty Remote-Power-Con-
trol handle can lead to faults during
operation.
Clean the Remote-Power-Control
▶
handle with a soft cloth and a com-
mercially available plastic cleaner.

Opening the lid

Requirement: The appliance is
switched off.
→ "Switching off the appliance",
Page 34
Open the lid.
1.
→ Fig.
22
Fold up the lid completely.
2.

Closing the lid

Tip: Check that the dust bag is not
trapped between the lid and the ap-
pliance.
Requirements
¡ The dust bag has been inserted.
¡ The motor protection filter has
been inserted.
¡ The exhaust filter has been inser-
ted.
Cleaning and servicing en
Close the lid and lock it in place.
▶
Cleaning the dust compart-
ment
Requirement: The dust bag has
been removed.
→ "Changing the dust bag",
Page 37
If required, vacuum the dust com-
▶
partment using a second appli-
ance or clean it with a dry duster
or dusting brush.
a The dust compartment has been
cleaned.

Changing the dust bag

If the inspection window of the filter
change indicator lights up continu-
ously when the nozzle is raised and
at the highest power level, change
the dust bag.
Requirement: The lid is open.
→ "Opening the lid", Page 37
To close the dust bag, pull the
1.
locking tab.
→ Fig.
23
Remove the full dust bag from the
2.
holder.
Dispose of the full dust bag.
3.
Push the new dust bag into the
4.
holder until it clicks into place.
Do not kink the dust bag.
‒
→ Fig.
24
→ "Closing the lid", Page 37
5.
Cleaning the motor protection
filter
Tip: To achieve the best possible va-
cuuming results, tap out or wash the
motor protection filter regularly. After
vacuuming fine dust particles, clean
37