Pkm 8060G Bedienungsanleitung Seite 71

1. Position the suspension device on the wall. Choose a proper position which meets
2. Mark the position of the holes with a pencil.
3. Now drill the holes and fix the suspension device with the screws and dowels/plugs.
4. Suspend the hood.
5. Now connect the exhaust hose to the corresponding outlet of the hood.
6. Install the exhaust hose to the corresponding outlet ( look at figure A/B ).
7. Now fix the chimney back brace onto the chimney.
8. Now fix the complete chimney onto the hood.
9. Fix the chimney mounting rail into the desired position on the wall with the screws
10. Pull the telescopic part to the mounting rail and fix it on the rail.
11. Put in the plug and insert the grease filters.
Check the correct position of the hood from front and side perspective. Otherwise the
appliance will not properly work.
Downloaded from www.Manualslib.com
the dimensions of the chimney.
and dowels.
manuals search engine
71