Product Features; Technical Data; Noise/Vibration Information - Berner 000088 Originalbetriebsanleitung

OBJ_BUCH-1135-001.book Page 15 Tuesday, January 12, 2010 1:32 PM

Product Features

The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Depth adjustment knob (insulated gripping sur-
face)
2 Chip ejector (alternatively right/left)
3 Storage compartment for planer blade/
Allen key
4 Planing depth scale
5 Lock-off button for On/Off switch
6 On/Off switch
7 Belt cover
8 Screw for belt cover
9 Chip ejection selector lever
10 Planer base plate
11 V-grooves
12 Handle (insulated gripping surface)
13 Blade drum
14 Clamping element for blade
15 Fastening screw for planer blade
16 Carbide blade (TC)
17 Lateral blade-shaft protector
18 Allen key
19 Extraction hose ( Ø 35 mm)*
20 Chip/dust bag*
21 Parallel guide*
22 Locking nut for adjustment of rebating width
23 Fastening bolt for parallel and beveling guide
24 Angle stop*
25 Locking nut for angle adjustment
26 Fastening bolt for rebating depth stop
27 Rebating depth stop*
28 Park rest*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
2 609 932 749 • 12.1.10

Technical Data

Planer
Art. No.
Rated power input
Output power
No-load speed
Planing depth
Rebating depth
Planing width, max.
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given apply for nominal voltages [U] of 230/240 V.

Noise/Vibration Information

Measured sound values determined according to
EN 60745.
Typically the A-weighted noise levels of the product
are: Sound pressure level 85 dB(A); Sound power
level 96 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Vibration emission value a
h
2
K =1,5 m/s .
The vibration emission level given in this information
sheet has been measured in accordance with a stand-
ardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a
preliminary assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
used for different applications, with different accesso-
ries or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the expo-
sure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as: main-
tain the tool and the accessories, keep the hands
warm, organisation of work patterns.
BP 40-82 C
000088
001342 (CH)
W 850
W 450
-1
min 14000
mm 0 – 4,0
mm 0 – 24
mm 82
kg 3.2
/ II
2
=7.5 m/s , Uncertainty
English | 15