Waeco CoolMatic CRP-40 Bedienungsanleitung Seite 30

CRP-40.book Seite 30 Donnerstag, 8. Oktober 2009 11:48 11
Setting up and connecting the refrigerator
e
➤ For the electrical connection you also need the wiring diagram (fig. 0,
➤ Connect the refrigerator (fig. a, page 7)
e
30
Downloaded from www.Manualslib.com
Key for fig. 9, page 6
Co-ordinate axis
l
∅
Caution!
Make sure that the polarity is correct.
Before starting up the appliance for the first time, check whether the op-
erating voltage and the battery voltage match (see type plate).
page 7).
No. in fig. 0,
Meaning
page 7
1 Electronic terminal rail
2 Compressor
3 DC fan (if present)
4 Mechanical thermostat
– as directly as possible to the poles of the battery or
– to a plug socket which is fuse protected with at least 15 A (at 12 V) or
7.5 A (at 24 V).
Caution!
Disconnect the device and other consumers from the battery be-
fore charging the battery with a quick charging device.
Over voltages can damage the electronics of the device.
manuals search engine
Meaning
Cable length
Cable cross section
CoolMatic CRP-40
Unit
m
mm²