Herunterladen Diese Seite drucken

Hot Water; Descaling; Agua Caliente; Descalcificación - Philips Saeco Syntia HD8833 Anweisung

Vorschau ausblenden Andere Handbücher für Saeco Syntia HD8833:

Werbung

Instructions
12
Instrucciones
Place a container under the
Pannarello.
Colocar un recipiente bajo el
Pannarello.
Empty the drip tray. Remove
the INTENZA+ fi lter (if in-
stalled).
Vaciar la bandeja de goteo.
Extraer el fi ltro INTENZA+
(en su caso).
Downloaded from
www.Manualslib.com
Turn the selector dial clock-
wise to the
position.
Girar el selector en el sen-
tido de las agujas del reloj
hasta la posición
.
DESCALING - 35 min.
DESCALCIFICACIÓN - 35 min
When the
icon is displayed, descaling is needed.
Not doing this will make your appliance stop working properly. In this case the repair is not covered under your warranty.
El símbolo
visualizado indica que es necesario proceder a la descalcifi cación.
Si dicha operación no se lleva a cabo, la máquina dejará de funcionar correctamente. En tal caso, la reparación no
estará cubierta por la garantía.
Remove the Pannarello from
the steam/hot water wand.
Quitar el Pannarello del
tubo de vapor/agua ca-
liente.
manuals search engine
www.philips.com/support

HOT WATER

AGUA CALIENTE

Dispense the desired quan-
Then turn the selector dial
tity of water.
and set it back to the posi-
tion to stop dispensing.
Suministrar la cantidad de
Para interrumpir el sumi-
agua deseada.
nistro, girar el selector a la
posición .
Temporarily stop the dis-
If the descaling solution and/or water spills out of the dis-
pensing process in order to
pensing spout:
empty the containers.
PAUSE: turn the selector dial to the "
START: turn the selector dial to the " " position.
Se puede interrumpir mo-
Si la solución y/o el agua sale por la salida de café:
mentáneamente el sumi-
PAUSA: llevar el selector a la posición
nistro para poder vaciar los
PUESTA EN MARCHA: llevar el selector a la posición .
recipientes.
Remove the container.
Retirar el recipiente.
" position;
;

Quicklinks ausblenden:

Werbung

loading