Brewing Coffee With Pre-Ground Coffee; Dispensing Hot Water; Personalizing Drinks - Philips 5400 Serie Benutzerhandbuch

2 Tap one of the one-touch drinks icons to select a drink or tap the 'More Drinks' icon to select a
drink.
3 Use the up arrow to set the strength to the top level and then select the ExtraShot function (Fig. 13).
4 Tap the OK icon if you want to personalize the other settings. Then press the start/stop
start brewing the drink.
5 To stop dispensing the drink before the machine has finished, press the start/stop
When you have selected the ExtraShot function, you can only brew one coffee at the time.

Brewing coffee with pre-ground coffee

You can choose to use pre-ground coffee instead of beans, for example if you prefer a different coffee
variety or decaffeinated coffee.
1 Open the lid of the pre-ground coffee compartment and pour one leveled measuring scoop of pre-
ground coffee into it (Fig. 14). Then close the lid.
2 Tap one of the one-touch drink icons or tap the 'More Drinks' icon to select another drink.
3 Select the pre-ground coffee function. You can do this in 2 different ways:
- use the down arrow to set the strength to the lowest level and then select the pre-ground function.
- press the Settings
4 To stop dispensing coffee before the machine has finished, press the start/stop
When you select the pre-ground coffee function:
- it is automatically stored.
- you can only brew one coffee at a time.
- you cannot select a different aroma strength.

Dispensing hot water

1 If attached, remove LatteGo.
2 Place a cup under the hot water spout.
3 Tap the 'More Drinks' icon (Fig. 4) and use the up and down arrows to select hot water.
4 Use the up and down arrows to adjust the hot water quantity and/or temperature to your
preference.
5 Press the start/stop
- Hot water is dispensed from the hot water spout (Fig. 15).
6 To stop dispensing hot water before the machine is finished, press the start/stop

Personalizing drinks

The machine allows you to adjust the settings of a drink to your own preference and to store the
adjusted drink in a personal profile. The different profiles have different colors.
After selecting a drink by tapping one of the one-touch drink icons or by tapping the 'More Drinks'
icon, you can do the following things:
1 adjust the aroma strength with the up and down icons (Fig. 16). There are 5 strengths, the lowest is
the mildest and the highest is the strongest.
2 adjust the coffee quantity (Fig. 17) and/or the milk quantity with the up and down icons. There are 5
quantities for each of the settings.
As soon as the machine has finished brewing, the settings you selected will be stored automatically
in the profile you chose.
icon and use the down arrow to select the pre-ground function.
button.
English
11
icon to
icon again.
button again.
button again.