Hot Water - Philips Saeco ARMONIA RI9330/01 Bedienungsanleitung

All manuals and user guides at all-guides.com
press the brew button again (4) to stop the coffee brewing
and remove the cups of coffee (Fig. 14).
• (Fig.15) - Wait a few seconds after brewing, then remove
the portafi lter and empty the coffee grounds.
Note: If a small quantity of water remains in
the portafi lter; this is normal and is due to the
portafi lter features.
Note for cleaning: Keep the ground coffee fi lter
basket clean by removing it from the portafi lter;
then wash it with running water (see Fig. 16).
5.2 Using Coffee Pods
• (Fig.8A) - Remove the ground coffee fi lter (15) from the
portafi lter (14) by pulling it upwards.
• (Fig.9) - Insert the rubber pod adapter (17) - with its
convex part facing down - into the portafi lter (14). Then
insert the pod fi lter (18).
• (Fig.10) - Insert the portafi lter into the brew unit from the
bottom (8).
• (Fig.11) - Turn the portafi lter to the right until it locks into
place.
• Release the grip from the portafi lter. The handle is
automatically slightly turned leftwards.
This movement ensures the portafi lter's performance.
• (Fig.13) - Preheat the portafi lter by pressing the brew
button (4) until some water pours out of the portafi lter.
This operation is only necessary for the fi rst coffee.
• After some water has fl owed out, press the brew button
(4) again to stop hot water dispensing.
• (Fig.15) - Remove the portafi lter from the machine,
by turning it from right to left and drain the rest of the
water.
• Insert single-portion pod into the portafilter; make
sure that the paper of the pod does not stick out of the
portafi lter.
• (Fig.10) - Insert the portafi lter into the brew unit from the
bottom (8).
• (Fig.11) - Turn the portafi lter to the right until it locks into
place.
• (Fig.12) - Take one preheated cup and place it under
the portafi lter. Check that it is correctly placed under the
coffee brewing spouts.
• (Fig. 13) - Press the brew button (4).
• When the desired quantity of coffee has been reached,
press the brew button again (4) to stop brewing and
remove the cup of coffee (Fig. 14).
• (Fig.15) - Wait a few seconds after brewing, then remove
the portafi lter and dispose of the used pod.
Note for cleaning: Keep the pod fi lter clean by
removing it from the portafi lter; then wash it with
running water (see Fig. 16).
• 18 •
6 TIPS FOR CHOOSING COFFEE
As a general rule, any type of coffee available on the
market can be used. However, coffee is a natural
product, and its fl avour changes according to its origin
and blend. Therefore, it is a good idea to try different
types of coffee in order to fi nd the most suited to your
personal taste. For best results, we recommend
using blends which are made especially for espresso
coffee machines. Coffee should always fl ow out of the
portafi lter, and it should not dispense with a dripping
effect. The brewing speed can be modifi ed by slightly
changing the amount of coffee in the fi lter and/or using a
different coffee grind.
When making coffee from pods, Saeco recommends
using single-dose coffee pods marked E.S.E. for a great-
tasting espresso and an easy clean-up.
BEFORE USING THE HOT WATER/STEAM
KNOB, MAKE SURE THAT THE STEAM SPOUT
(PANNARELLO) IS POSITIONED OVER THE DRIP TRAY.
7

HOT WATER

Danger of burns! Brewing may be preceded by
small jets of hot water. The spout can reach high
temperatures: Never touch it with bare hands.
• (Fig.4B) - If the machine is off, switch it on by means of
the power button (2). The power light (3) will illuminate.
• Wait until the machine ready light (5) turns on.
• (Fig.17) - Place a container or a cup under the steam
spout (Pannarello). Open the knob (7).
• (Fig. 18) - Press the brew button (4).
• When the desired amount of hot water has been
dispensed, press the brew button (4) again.
• (Fig.19) - Close the knob (7), then remove the hot water
container.
8 STEAM / CAPPUCCINO
Danger of burns! Brewing may be preceded by
small jets of hot water. The spout can reach high
temperatures: Never touch it with bare hands.
• (Fig.4B) - If the machine is off, switch it on by means of
the power button (2). The power light (3) will illuminate.
• Wait until the machine ready light (5) turns on.
• (Fig.20) - Press the steam button (6). The machine ready
light (5) turns off.