mamibot EXVAC890 GLORY Gebrauchsanweisung Seite 25

Charge Method B:
• Connet the adapter with the DC socket of the charging base, attach
GLORY to the charging base by aligning its charging poles with the
charging poles on the base.
• Connet the AC power socket well, attach GLORY to the dust collector
by aligning its charging poles with the charging poles on the base.
• The LED indicator on the dust collector will be slowly flashing white
if it is switched on properly.
• The LED indicator on the charging base will be slowly flashing green
if it is switched on properly.
GLORY With Charging Base
Auto Recharge
• GLORY will start to find the charging base automatically for recharge
when the battery power is low or GLORY finishes the cleaning work.
• Please keep the charging base connected with the power system, or
GLORY will not be able to find the charging base.
Charging instruction
• GLORY can only be charged by the orignal power adapter and
charging base, dust collector CRAFT X provided by Mamibot.
• GLORY may not be able to find the charging base quickly, it will
improve the efficiency of finding charging base after working several
times.
• Please charge GLORY for 12 hours for the first time. Both the LED
indicator on the Start/Stop button and Auto charge button will be white.
• Pease let GLORY run out of power at the first use.
• Users can press the Auto Recharge button on GLORY or on the remote
control, or press the Recharge button on APP to order GLORY to find
charging base.
• Please turn off the main power switch if the robot will be out of service
for a long time.
• Please charge GLORY as soon as possible after the battery is used up.
• The battery should be repaired and replaced by the after-sales service
center.
OR
GLORY With Dust Collector
20