Gb 6.3 Remote Control; Connecting The Power Supply - Hama 118564 Bedienungsanleitung

6.3 Remote control
• Open the battery compartment of the remote control (Fig.).
• Insert a type CR2032 button cell battery, observing polarity.
• Remove the contact breaker strip from the battery if present.
• Close the battery compartment. Make sure that the cover closes easily and tightly.
GB

6.4 Connecting the power supply

• Connect the enclosed power supply unit to a properly installed socket.
• Then connect the lead of the power supply unit to the DC In of the device.
8
Downloaded from www.Manualslib.com
Warning
• Only connect the product to a socket that has been approved for the device. The socket
must be installed close to the product and easily accessible.
• Do not continue to operate the device if it becomes visibly damaged.
Note
• The power supply unit is suitable for mains voltages of 100–240 V and therefore can be
used worldwide. Please note that a country-specific adapter may be necessary.
• You can find a selection of compatible Hama products at www.hama.com.
manuals search engine
2
1