Causes Of Errors And Error Rectification - Hama 118564 Bedienungsanleitung

8. Causes of errors and error rectification

The following table can be used to localise and rectify minor errors with the device:
GB
18
Downloaded from www.Manualslib.com
Warning – Data Loss
• Ensure that data transfer is complete before you remove the memory card from the device.
• Always use the "Eject" function of your operating system before removing the removable
storage medium from the device or disconnecting the device (with inserted storage
medium) from your computer.
• If you do not do this, data may be lost.
Note
Contact our customer service department if the problem remains after taking the following
steps.
Error Possible cause
Device is switched off
Power supply adapter not
connected correctly
Display is blank
No mains power
Device is faulty
By static electricity, such as
occur during normal daily use
Device turns off (carpet, wool sweater), it may
happen that the device will go
into Standby Mode.
manuals search engine
Solution
Switch on the device.
Ensure that the power supply
adapter is plugged in and
connected to the device.
Check your fuse box.
Inform our customer service
department.
In case that the device shouldn´t
react on any commands or show
a black screen, reset the device
by pressing the POWER button
on the remote control or on the
backpanel of the device.