Removing The Transportation Safety Assembly; Adjusting The Feet; Changing The Illumination Lamp - Beko DC 7230 BX1 Bedienungsanleitung

• The rear surface of the tumble dryer shall
be placed against a wall.
B
DANGER!
• Do not place the dryer on the power
cable.
3.2 Removing the transportation
safety assembly
A
WARNING!

3.3 Adjusting the feet

3.4 Transportation of the dryer
Drain all water that has remained in the dryer.
If direct water drain connection is made, then
remove the hose connections.
A
WARNING!
• We recommend carrying the dryer in
upright position. If it is not possible to
carry the machine in the upright position,
we recommend carrying it by tilting
towards the right side when looked from
the front.
32
• Remove the
transportation
safety assembly
before using the
dryer for the first
time.
• If the door swing
side of your
appliance can
be modified, see
the reversible
door mounting
instructions.
Turn the feet to left
or right until the
dryer stands level
and firmly.

3.5 Changing the illumination lamp

In case an illumination lamp is used in your
laundry dryer.To change the Bulb/LED used
for illumination of your tumble dryer, call your
Authorized Service.The lamp(s) used in this
appliance is not suitable for household room
illumination. The intended purpose of this
lamp is to assist the user to place laundry in
the tumble dryer in a comfortable way. The
lamps used in this appliance have to withstand
extreme physical conditions such as vibrations
and temperatures above 50 °C
Dryer / User Manual