Inhaltsverzeichnis
Werbung
B560 Steel Legend
Step 3
Move the standoff based on
the module type and length .
The standoff is placed at the nut
location B by default. Skip Step 3 and
B
A
4 and go straight to Step 5 if you are
going to use the default nut.
Otherwise, release the standoff by
hand.
Step 4
Peel off the yellow protective film on
the nut to be used. Hand tighten the
standoff into the desired nut location
B
A
on the motherboard.
Step 5
Gently insert the M.2 (NGFF) SSD
module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
module only fits in one orientation.
B
A
B
A
20
o
Step 6
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw
as this might damage the module.
NUT2
NUT1
B
33
Werbung
Inhaltsverzeichnis
