Herunterladen Inhalt Inhalt Diese Seite drucken

Faults Table - Atag KS35088C Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für KS35088C:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

OTHER

Faults table

When you have any doubts about whether your appliance is working properly you should not
immediately assume that it is defective. We recommend that you should in any case check the
points in the following table.
Problem
Appliance is
connected to the
power supply but
is not working.
Appliance cools
continuously for a
long time.
Excessive ice
formation in the
freezer.
Symbol D flashes.
Door does not
open easily.
Cause/Solution
Check that the socket is live and that the appliance is switched on.
The compressor is operating for a longer time at low capacity (low
energy consumption / high efficiency). This is the most efficient form
of operation. The following factors can also influence the appliance's
operation:
• The ambient temperature is too high.
• The door has been opened for too long or too frequently.
• The door is not closed properly.
• The door does not seal properly (the seal is dirty, the door is
misaligned or the seal is damaged, etc.).
• Too much fresh food has been put in at the same time.
• Insufficient air circulation around the compressor and condenser.
Check that the ventilation around the appliance is sufficient (see
the separate installation instructions).
• The freezer compartment has not been defrosted periodically.
Defrost the freezer compartment to remove the ice.
• The door is not closed properly.
• The door does not seal properly (the seal is dirty, the door is
misaligned or the seal is damaged, etc.).
• The door has been opened for too long or too frequently.
• The door does not seal properly (the seal is dirty, the door is
misaligned or the seal is damaged, etc.).
• Too much fresh food has been put in at the same time.
• A major power failure has occurred.
You are trying to open the appliance's door just after you have closed
the door. Then opening the door is difficult. When you open the door,
cold air escapes from the appliance and is replaced by warm air
from the surroundings. As this air cools a slight vacuum is created
that makes it more difficult to open the door. The situation returns to
normal after a few minutes, and the door opens easily again.
EN 27

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Kd65088c

Inhaltsverzeichnis