Atag KS35088C Bedienungsanleitung Seite 51

DESCRIPTION OF THE APPLIANCE
Open door alarm
If you only switch off the alarm by touching the A key, the alarm will switch on again
after some time because the door is still open.
High temperature alarm
A signal will sound when the temperature in the appliance is too high. Furthermore, symbol D
shown in the display will flash. A high temperature can be caused for several reasons:
• The door has been opened for too long or too frequently.
• The door does not seal properly.
• Too much fresh food has been put in at the same time.
Every time the appliance is switched on again, it takes a while until the correct
temperature is reached. For this reason, the alarm is disabled for the first 24 hours
after the appliance is switched on to prevent the unnecessary activation of the alarm.
Stopping the alarm
1. Touch the A key to stop the alarm.
▷ The alarm will stop sounding.
▷ Symbol D shown in the display continues to flash while the temperature is still too high.
When you press the A key for the first time, the alarm will be acknowledged and
turned off. When you press the A key again, it will already work as a settings
adjustment key.
When the alarm is not stopped manually and the temperature remains too high, the
signal will sound for the first minutes of every half hour and when the door is opened.
An alarm signal sounds when a door is open for too long.
Stopping the alarm
1. Close the door.
▷ The alarm will stop sounding.
EN 19