Atag KS35088C Bedienungsanleitung Seite 49

DESCRIPTION OF THE APPLIANCE
Adjusting the temperature in the appliance
• The factory default setting is the recommended temperature of
–18 °C.
• After the appliance is switched on, it may take several hours for the set
temperature to be reached. Do not place any food into the appliance
before the temperature has dropped to the selected setting.
• Adjust the temperature as desired using the A key.
• Press the A key (several times) until the desired temperature
indicator lights up.
• When the A key is pressed for the first time, the currently set value
or function will start to flash. Every successive time you press the A
key, the settings indicator will move to the next setting (from right to
left, in a circular manner).
• After three seconds, the setting will stop flashing. Your setting will
be stored and the corresponding indicator will be continuously lit.
The numbers -24, -22, -20, -18 and -16 indicate the degrees
Celsius (°C) in the appliance.
• The recommended temperature setting is –18 °C. At this
temperature, food quality and freshness are preserved longer.
• If the ambient temperature in the room where the appliance is
installed is below 16 °C, we recommend setting a temperature lower
than -18 °C.
EN 17