Gssmart Basic Operations; Power On - GSScanner GSsmart Benutzerhandbuch

3. GSsmart Basic Operations

This section contains a description of how errors and messages are shown, how to power on/
off the device and how the battery level is displayed.

3.1 Power On

The GSsmart is powered on by pressing the OK/Power button, see figure 4.
When the GSsmart is powering on it starts by initializing the application. During
Initialization the blue LED on the right will blink.
Figure 5 Startup and initialization complete
When the startup is complete the right LED will be turned off.
If an error happens during initialization then the blue and yellow LED on the right will light
alternating. A high and low frequency will sound and the GSsmart will start vibrating. This
continues for 5 minutes.
Downloaded from www.Manualslib.com
Figure 4 Power Button
manuals search engine
wait
max. 3-4 min.
Figure 6 Error during initialization.
6