Faq And Support - GSScanner GSsmart Benutzerhandbuch

In general if an error occurs using the GS Control then execute a retry operation by following these steps:
1. Remove the GSsmart from the USB.
2. Turn off the GSsmart and hereafter turn it on again.
3. After the device has completed initialization do connect the device to the USB again.
4. Restart the GS Control and repeat the operation that failed.
5. If it still fails then consult the FAQ or customer support, see section 6.
Error Code
700-750
800-810
900
910-930
1000
1100

6. FAQ and Support

A FAQ and support is available on the PANMOBIL dedicated web shop (http://www.gsscanner.com/).
Downloaded from www.Manualslib.com
Description
Error when during Synchronization
Error reading device log file
Error reading About information
Error reading or writing Settings
Error when communicating with the server
Device is locked
manuals search engine
Action
Please, execute the retry operation
Please, execute the retry operation
Please, execute the retry operation
Please, execute the retry operation
Please, execute the retry operation
Please, execute the retry operation
18