DeFelsko PosiTector BHI Gebrauchsanweisung Seite 13

Send Batches
Transfers selected batches to the PosiTector App. Send Batches
is useful when switching between devices, as only readings and
batches that have yet to be synchronized with any smart device
are synchronized automatically.
The Send Batches option is visible in the menu when the Gage
is connected to a smart device running the PosiTector App.
BLE Keyboard
When enabled and connected to a computer, the PosiTector will
be recognized as a wireless Keyboard. Readings are sent to the
computer as they are taken, emulating keystrokes, followed by a
carriage return.
Determine if a software update is available for your Gage.
See www.defelsko.com/update
an update. All stored measurements will be erased from memory.
(Advanced models only)
The Gage will perform a Hard Reset (pg. 6) after
12