Herunterladen Inhalt Inhalt Diese Seite drucken

Placing In Operation - SOLIS SCALA ZERO STATIC 1662 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SCALA ZERO STATIC 1662:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
s PLACING IN OPERATION
The bean container has been fitted, the grind set and the coffee beans have
been added. The ground coffee container with its lid has been pushed into the
appliance.
1
ST E P : S E T TI N G Q UA N T IT Y O F GR O UN D C O F F E E U S IN G
S T
T HE T I M E R CO N TRO L
Select the quantity of ground coffee required by turning the Timer control. The
GB
longer the time or the higher the number, the longer the appliance will grind and
the greater the quantity of ground coffee. The shorter the time or the lower the
number is, the less time the appliance will grind and the smaller the quantity of
ground coffee. The maximum time that can be set is 60 seconds (setting 10).
Note: Make sure you turn the Timer
control only to position 10 as a max-
imum. There you will notice a stop
that must not be passed by apply-
ing force; this action would damage
the timer. The costs that would be
incurred for a repair are not covered
by the guarantee.
Attention: Please ensure the ground coffee container is never overfilled.
Depending on the grind set, this may occur already if the Timer control is set to
setting 5. With a full ground coffee container, the build-up of ground coffee
will cause the grinder to clog and the motor to overheat. If the Max mark on the
ground coffee container is reached, immediately press the Start/Stop button and
empty the ground coffee container before you start the grinding process again.
S T E P : G RIN D I N G CO FF E E BE A N S
2
N D
Press the Start/Stop button and the grinding process starts. After the time set
has elapsed, the appliance shuts down automatically.
To interrupt the grinding process manually, you can press the Start/Stop button
at any time.
Attention: Never overfill the ground coffee container! As soon as the Max mark
is reached, press the Start/Stop button and empty the container. On this issue,
see the explanations at the end of step 1.
3
S T E P : RE MO V IN G G RO UN D COF F E E
R D
Carefully pull the ground coffee container out of the appliance. The lid and the
built-in ion generator prevent ground coffee from escaping. Carefully remove
the lid and transfer the ground coffee to another container.
76

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis