Shdsl; Config - Elcon nect next BIG 10 Kurzbedienungsanleitung

BIG 10 Bridge
3.4

SHDSL

The following pages show the SHDSL configuration and states of the BIG 10.

3.4.1 Config

On this page specific SHDSL parameter can be configured.
Figure 12: SHDSL Config
Operating Mode
The operating mode offers multiple setting options and can be configured in RT ("remote
terminal" or CPE) or COT ("central office terminal") mode.
EFM G.hs Mode / TC Layer
"EFM": ITU G.hs according to ITU-T G.994.1 and IEEE802.3ah
"ATM": The ethernet frames are encapsulated into ATM cells.M
EFM-PAF / ATM-MPair Mode
ATM MPair mode allows to bond several SHDSL links to one logical ethernet link with hig-
her bandwidth. In m-pair mode a single link failure causes a failure of the complete connec-
tion.
ATM VPI Value
VPI: Virtual Path Identifier (default: 0)
Identifier for used virtual path within the ATM network (0 ... 4095)
36
Version: 2013/04/15
Downloaded from www.Manualslib.com manuals search engine