Lan; Configuration; Statistics - Elcon nect next BIG 10 Kurzbedienungsanleitung

BIG 10 Bridge
address assignment can be changed. The configuration of a domain giving it a domain name is
supported.
3.3

LAN

The menu „LAN" allows the user to execute settings of the LAN-ports, such as Auto Negotia-
tion and Flow Control, which will become effective for the downstream equipment.

3.3.1 Configuration

In default configuration, the LAN-ports are set to Auto Negotiation, and do not need to be
changed. However, should problems occur during information exchange with the remote sta-
tion (CPE), it is possible to set the bit rate to half- or full duplex, and 10 Mbps resp. 100 Mbps
as fix value or Auto-Neg. By ticking the „Flow Control" option, the flow control for the relat-
ed LAN-Port can either be enabled or disabled (default: LAN-Port: ON).
Figure 11: Configuration LAN Ports

3.3.2 Statistics

The submenu „Statistics" allows the user in case of need (e.g. for fault analysis) to have the
number of sent (Tx) and received (Rx) packets / bytes (e.g. faultless, faulty, oversize, under-
size, etc.) resp. packet type and size traced on the LCT-, LAN- and WAN-port. By clicking on
„Reset All" all counters will be zeroed, whereas a click on „Update" means that the counters
on the Web-GUI will updated and accept the current status.
35
Version: 2013/04/15
Downloaded from www.Manualslib.com manuals search engine